How we calculate
Every calculator here uses one cost model with transparent assumptions. Each tool has a “How we calculate” panel with its exact math. This page covers the shared model, the defaults and the sources behind them. Enter your own numbers and the defaults stop mattering, but they’re honest starting points.
The model
Lifetime = install + N × operating/yr + Σ(replacement events with year ≤ N)
Operating = (pump W × h/day × season days ÷ 1000 × $/kWh) + make-up water + chemicals + maintenance + heating
Make-up water = area × net evaporation × 0.623 × (1 − cover) ÷ 1000 × (water + sewer rate)
Replacements (cash) = Σ event costs within the horizon · Set-aside/yr = Σ(cost ÷ interval)
- Three buckets, kept separate. The one-time install is paid once. Operating costs — the pump’s electricity, chemicals, make-up water, maintenance and optional heating — recur every year. Replacements are periodic capital scheduled as discrete events in the year they occur. Nothing is counted in more than one bucket, so the install and a future replacement never double-count.
- Energy is computed from drivers, not a flat figure. Pump kWh = running watts × hours per day × season days ÷ 1000, priced at the EIA residential rate (about 18¢/kWh in 2026, grade A). Variable-speed is the default for new pools (DOE standard); single-speed is the legacy option. You can override watts, hours, season and rate.
- Replacements are discrete events, not a flat reserve. Pump, filter, liner, resurface, salt cell and heater are each scheduled in the year they occur; only events within your horizon count as cash. A separate long-run set-aside budgets for the rest, and a “wear accrued” figure shows capital used but not yet paid. Fiberglass has no liner or resurface — its main cost advantage.
- Heating is off by default. It’s the single biggest and most variable line. The monthly figure is per active heating-season month for a representative ~594 sq ft pool and scales with your pool’s surface area; the number of heating months defaults from your climate but stays editable. DOE puts heat pumps far below gas to run. These are an illustrative starting point (grade C), not a national average, and gas is the least certain.
- Chemicals and maintenance are full-year figures. They don’t shrink when you pick a shorter climate season, so if you close the pool for part of the year, lower them to match.
- Make-up water is computed from evaporation. Gallons = surface area × net evaporation (in/yr, by climate) × 0.623 × (1 − cover), priced at the EPA WaterSense water rate. It is water-only by default; sewer is added only if you turn it on (many utilities exempt pool make-up water). The flat placeholder is gone; evaporation bands and rates are grade B, while backwash/splash has no invented default — enter it yourself.
- Install and upkeep are ranges, labelled as estimates. Pool cost has no single authoritative benchmark, so these come from the major 2026 cost guides and are shown with their range. We default to a typical figure (not an arithmetic midpoint) — replace it with a real quote.
- Low / Typical / High are coherent scenarios. Typical is the set of defaults on this page; Low and High are fixed example configurations (smaller/milder vs larger/year-round), each using values inside the documented ranges and grades — never the minimum or maximum of every input at once. Selecting one loads its preset; your edits then override it, and a reset restores the selected scenario’s own preset.
- Today’s dollars. No inflation is applied. Energy and labour have been rising, so treat a long ownership horizon as a floor rather than a ceiling.
Defaults and sources
| Figure | Value | Source · verified |
|---|---|---|
| Electricity price (residential) | $0.182/kWh | U.S. EIA — Short-Term Energy Outlook (electricity), Nov 2026 · 2026-11-21Confidence: grade A |
| Chemicals (chlorine pool) | $200–$1,350 | HomeGuide / HomeAdvisor / This Old House / NerdWallet — 2026 pool cost guides · 2026-11-21Confidence: grade CEstimate: cost-guide range, method not published. |
| Maintenance (DIY) | $300–$1,000 | HomeGuide / HomeAdvisor / This Old House / NerdWallet — 2026 pool cost guides · 2026-11-21Confidence: grade DEstimate: cost-guide range, method not published. |
| Maintenance (pro service) | $960–$2,400 | HomeGuide / HomeAdvisor / This Old House / NerdWallet — 2026 pool cost guides · 2026-11-21Confidence: grade DEstimate: cost-guide range, method not published. |
| In-ground install, national avg | $45,000–$100,000 | HomeGuide / HomeAdvisor / This Old House / NerdWallet — 2026 pool cost guides · 2026-11-21Estimate: cost-guide range, method not published. |
Pump energy (computed from drivers)
Pump electricity is not a flat figure — it is watts × hours/day × season days ÷ 1000, priced at the residential rate above. At the national 210-day season:
- Variable-speed (default): 320 W × 12 h × 210 days ÷ 1000 ≈ 806 kWh/yr → $147/yr.
- Single-speed (legacy): 2000 W × 6 h × 210 days ÷ 1000 ≈ 2,520 kWh/yr → $459/yr.
(Historical anchor, grade B: EIA RECS 2020 pool-pump households averaged ~2,384 kWh/yr nationally; the old flat “4,500 / 6,000 kWh” figures were a Florida measurement and a 2018 advocacy ceiling, not a national default — the driver model above replaces them.)
Heating (optional, grade C)
Heating is OFF by default and is the biggest, most variable line. The table below is the cost per active heating-season month (multiply by the months you run the heater — a climate-seeded default you can edit) for a representative ~594 sq ft pool. The calculator scales these by your pool’s surface area, since heating load is roughly proportional to surface area. These are an illustrative starting point for a representative pool, not a measured national average; gas is the least certain line (it varies ~2–3× with how aggressively you heat), so it is shown with a wide range. Heat pump & gas, 2026 EIA fuel prices (DOE-anchored).
| Per heating-season month | No cover | Cover part-time | Cover when unused |
|---|---|---|---|
| Heat pump | $170 ($90–$300) | $110 ($60–$190) | $70 ($35–$120) |
| Gas | $350 ($200–$700) | $230 ($130–$450) | $140 ($80–$280) |
Install cost by pool type
Installation is a base pool price plus itemized ancillaries. Essentials (electrical & bonding, permits, initial water fill, and a code-required fence) are on by default; optional upgrades (heater, cover, lighting, additional decking, landscaping, site adders) are off. A base that already includes a deck suppresses the separate decking line, and an existing compliant fence sets the fence to $0. The base is a typical default per type — a real quote is always better.
| Pool type | Install range | Replacement events |
|---|---|---|
| Concrete / gunite in-ground | $50,000–$120,000 grade C | Resurface, pump + filter |
| Fiberglass in-ground | $40,000–$85,000 grade D | pump + filter |
| Vinyl-liner in-ground | $35,000–$75,000 grade D | Liner, pump + filter |
| Above-ground | $2,500–$8,000 grade D | Liner, pump + filter |
Our rules
- Every figure has a source and a date. We never fill a number from memory.
- The authoritative lines (energy, electricity price) are sourced from DOE and EIA; install and upkeep are dated cost-guide ranges, labelled as estimates.
- Per-state electricity prices and per-type upkeep are being added. Until then the national average is used and said to be national.
- Found something wrong? Tell us and we’ll fix it.